BLOWER UNIT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE AIR CONDITIONER UNIT ASSEMBLY

    Click here

  2. REMOVE BLOWER ASSEMBLY


    1. A01V96L

      w/ PTC Heater:

      Remove the screw and disconnect the connector bracket and wire harness.

    2. Disconnect the connector.

      A01V6PU

    3. Remove the 3 screws and blower assembly.

  3. REMOVE AIR FILTER CASE


    1. A01V895

      Detach the claw and guide, and remove the air filter case.

  4. REMOVE CLEAN AIR FILTER


    1. A01V9TX

      Remove the clean air refiner as shown in the illustration.