REAR SEAT OUTER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR SEAT BELT RETRACTOR COVER LH


    1. Attach the claw to install the rear seat belt retractor cover LH.

  2. INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH


    1. A01VA50C01
      *1 Bolt (A)
      *2 Bolt (B)

      Align the 2 claws with the seat belt positioning holes, and install the retractor of the rear No. 1 seat outer belt assembly LH with the 2 bolts as shown in the illustration.

      Torque:
      for bolt A
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }
      for bolt B
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
  3. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

    Click here

  4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  5. INSTALL DECK TRIM SERVICE HOLE COVER

    Click here

  6. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH


    1. Connect the shoulder anchor of the rear No. 1 seat outer belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    2. Check that the rear No. 1 seat outer belt assembly LH is not twisted.

    3. Connect the floor anchor of the rear No. 1 seat outer belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    4. Check that the rear No. 1 seat outer belt assembly LH is not twisted.

  7. INSTALL SEAT BELT ANCHOR COVER CAP


    1. Attach the guide and 2 claws to install the seat belt anchor cover cap.

  8. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  9. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  10. INSTALL REAR SEAT ASSEMBLY LH

    Click here

  11. INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

    Click here

  12. INSTALL REAR DECK TRIM COVER (w/ Full Size Spare Tire)

    Click here

  13. INSTALL REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Tire)

    Click here

  14. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

  15. INSTALL REAR NO. 2 FLOOR BOARD

    Tech Tips

    Use the same procedure described for the No. 3 rear floor board side.

  16. INSTALL DECK FLOOR BOX LH

    Click here

  17. INSTALL DECK BOARD ASSEMBLY (w/ Full Size Spare Tire)

    Click here

  18. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire, for Compact Tire)

    Click here

  19. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  20. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

    Click here