REAR SEAT OUTER BELT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

    Click here

  2. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  3. REMOVE DECK BOARD ASSEMBLY (for Compact Spare Tire)

    Click here

  4. REMOVE DECK BOARD ASSEMBLY (w/ Full Size Spare Tire)

    Click here

  5. REMOVE DECK FLOOR BOX LH

    Click here

  6. REMOVE REAR NO. 3 FLOOR BOARD

    Click here

  7. REMOVE REAR NO. 2 FLOOR BOARD

    Tech Tips

    Use the same procedure described for the rear No. 3 floor board side.

  8. REMOVE REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)

    Click here

  9. REMOVE REAR DECK TRIM COVER (w/ Full Size Spare Tire)

    Click here

  10. REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE (for Compact Spare Tire)

    Click here

  11. REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE (for Full Size Spare Tire)

    Click here

  12. REMOVE REAR SEAT ASSEMBLY LH

    Click here

  13. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  14. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  15. REMOVE SEAT BELT ANCHOR COVER CAP

    A01QO7Q

    1. Using a screwdriver, detach the 2 claws and guide to remove the seat belt anchor cover cap.

      Tech Tips

      Tape the screwdriver tip before use.

  16. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH


    1. A01QTHL

      Remove the bolt and disconnect the floor anchor of the rear No. 1 seat outer belt assembly LH.

    2. A01QU3G

      Remove the bolt and shoulder anchor of the rear No. 1 seat outer belt assembly LH.

  17. REMOVE DECK TRIM SERVICE HOLE COVER

    Click here

  18. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  19. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH

    Click here

  20. REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH


    1. A01QOSW

      Remove the 2 bolts.

    2. Detach the 2 claws to remove the rear No. 1 seat outer belt assembly LH.

  21. REMOVE REAR SEAT BELT RETRACTOR COVER LH


    1. A01QPI3

      Detach the claw to remove the rear seat belt retractor cover LH.