FRONT SEAT INNER BELT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY


    1. for Manual Seat:

      Click here

    2. for Power Seat:

      Click here

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. Disconnect each connector and each clamp.

    2. A00YRDN

      Fold up the separate type front seat cushion cover.

    3. A00YVSM

      Remove the nut and front seat inner belt assembly.

  3. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. w/o Occupant Detection ECU:


      1. Use the same procedure as for the driver seat.

        Click here

    2. w/ Occupant Detection ECU:


      1. A00YV4W

        Using moulding remover A, detach the 2 claws and 2 guides to remove the front seat cushion shield RH.

      2. Disconnect each connector and each clamp.

      3. A00YUWV

        Fold up the separate type front seat cushion cover.

      4. A00YR42

        Remove the screw.

      5. Detach the guide to remove the limit switch of the front seat inner belt assembly.

      6. Remove the nut and front seat inner belt assembly.