SEAT BELT WARNING LIGHT INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL TELLTALE LIGHT ASSEMBLY (SEAT BELT WARNING LIGHT)


    1. Connect the connector.

    2. Attach the claw and 2 clips to install the telltale light assembly (seat belt warning light).

  2. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here