SEAT BELT WARNING LIGHT INSPECTION

PROCEDURE


  1. INSPECT TELLTALE LIGHT ASSEMBLY (SEAT BELT WARNING LIGHT)


    1. A00YTA0C01
      *a Indicator A
      *b Indicator B
      *c Indicator C
      *d

      Component without harness connected

      (Telltale Light Assembly (seat belt warning light))

      Apply battery voltage to the connector according to the table below.

      OK
      Battery Connection Result

      Battery positive (+) - Terminal 9 (LAPB)

      Battery negative (-) - Terminal 22 (RLID)

      		 Indicator A comes on

      Battery positive (+) - Terminal 9 (LAPD)

      Battery negative (-) - Terminal 23 (RCID)

      		 Indicator B comes on

      Battery positive (+) - Terminal 9 (LAPD)

      Battery negative (-) - Terminal 24 (RRID)

      		 Indicator C comes on

      If the result is not as specified, replace the telltale light assembly (seat belt warning light).