FRONT SEAT INNER BELT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY


    1. for Manual Seat:

      Click here

    2. for Power Seat:

      Click here

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. Disconnect each connector and each clamp.

    2. A01GAT7

      Fold up the separate type front seat cushion cover.

    3. A01GC47

      Remove the nut and front seat inner belt assembly.

  3. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. w/o Occupant Detection ECU:


      1. Use the same procedure as for the driver seat.

        Click here

    2. w/ Occupant Detection ECU:


      1. A01GD3D

        Using moulding remover A, detach the 2 claws and 2 guides to remove the front seat cushion shield RH.

      2. Disconnect each connector and each clamp.

      3. A01GCE4

        Fold up the separate type front seat cushion cover.

      4. A01GD65

        Remove the nut and front seat inner belt assembly.