REAR SEAT CUSHION HEATER(for RH Side) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT CUSHION HEATER ASSEMBLY RH


    1. A01QOVYC01
      *1 Connector A
      *2 Connector B
      *a

      Component without harness connected

      (Rear Seat Cushion Heater Assembly RH)

      Check the rear seat cushion heater assembly RH.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        A1 (B) - A2 (E) Seat cushion heater temperature 20°C (68°F) 3.28 to 3.92 Ω
        A1 (B) - B1 Below 1 Ω
        A1 (B) - B2 3.28 to 3.92 Ω
        A2 (E) - B1 3.21 to 3.85 Ω

        If the result is not as specified, replace the rear seat cushion heater assembly RH.