REAR SEATBACK HEATER(for RH Side) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR SEATBACK HEATER ASSEMBLY RH

   
   

   1. 

      Using a tacker, install the rear seatback heater assembly RH with 16 new tack pins as shown in the illustration.

      Tech Tips

      
      

      • Secure the rear seatback heater assembly RH so that it does not bend or stretch.

      • Set the rear seatback heater assembly RH so that the nichrome wire is on the separate type rear seatback cover side.

   2. 

      Pass the wire harness through the hole of the separate type rear seatback cover.

2. INSTALL SEPARATE TYPE REAR SEATBACK COVER

   Click here

3. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD

   Click here

4. INSTALL REAR SEATBACK BOARD RH

   Click here

5. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY RH (w/ Child Restraint System Guide)

   Click here

6. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH (w/ Child Restraint System Guide)

   Click here

7. INSTALL REAR SEAT COVER

   Click here

8. INSTALL REAR SEATBACK COVER RH

   Click here

9. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY RH

   Click here

10. INSTALL REAR SEATBACK COVER

    Click here

11. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

    Click here

12. INSTALL REAR SEAT NO. 2 CUSHION HINGE COVER

    Click here

13. INSTALL REAR SEAT NO. 1 CUSHION HINGE COVER

    Click here

14. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH

    Click here

15. INSTALL REAR SEAT COVER CAP RH

    Click here

16. INSTALL REAR SEAT HEADREST ASSEMBLY

    Click here

17. INSTALL REAR SEAT ASSEMBLY RH

    Click here