SEAT MEMORY SWITCH INSPECTION

PROCEDURE


  1. INSPECT SEAT MEMORY SWITCH


    1. Check the resistance.


      1. A00YRHHC01
        *a

        Component without harness connected

        (Seat Memory Switch)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        3 (M1) - 1 (E) Memory 1 switch on Below 1 Ω
        4 (M2) - 1 (E) Memory 2 switch on Below 1 Ω
        2 (MRY) - 1 (E) SET switch on Below 1 Ω

        If the result is not as specified, replace the seat memory switch.