OUTER REAR VIEW MIRROR GLASS INSPECTION

PROCEDURE


  1. INSPECT OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH


    1. A00YS9PC01

      w/ Mirror Heater:

      Check the outer mirror heater operation.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 25°C (77°F) 5.4 to 8.1 Ω

        If the result is not as specified, replace the outer rear view mirror sub-assembly LH.

  2. INSPECT OUTER REAR VIEW MIRROR SUB-ASSEMBLY RH


    1. A00YTP2C01

      w/ Mirror Heater:

      Check the outer mirror heater operation.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 25°C (77°F) 5.4 to 8.1 Ω

        If the result is not as specified, replace the outer rear view mirror sub-assembly RH.