OUTER REAR VIEW MIRROR GLASS REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH


    1. A00YU66C01
      *1 Moulding Remover
      *2 Protective Tape

      Put protective tape around the outer rear view mirror sub-assembly LH.

    2. Using a moulding remover, detach the 2 claws of the outer rear view mirror sub-assembly LH as shown in the illustration.

    3. A00YSQ6C01
      *1 Moulding Remover
      *2 Protective Tape

      Using a moulding remover, detach the 2 claws of the outer rear view mirror sub-assembly LH as shown in the illustration.

    4. A00YWG5

      w/ Mirror Heater:


      1. Disconnect the connector and remove the outer rear view mirror sub-assembly LH.

    5. A00YU2O

      w/ Blind Spot Monitor:


      1. Disconnect the connector and remove the outer rear view mirror sub-assembly LH.