OUTER REAR VIEW MIRROR DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH

    Click here

  2. REMOVE OUTER MIRROR COVER LH

    Click here

  3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH

    Click here

  4. REMOVE LOWER OUTER MIRROR COVER LH


    1. A00YVTAC01
      *1 Tape

      Remove the tape.

    2. A00YUB4

      Detach the 5 guides.

    3. A00YUR1

      Detach the 5 claws to remove the lower outer mirror cover LH.

  5. REMOVE OUTER MIRROR RETRACTOR LH


    1. A00YSW1C01
      *a Cut the harness sub-assembly here

      Cut the harness sub-assembly at the position shown in the illustration.

      Note

      Make sure to replace the harness sub-assembly with a new one.

    2. A00YUFU

      Remove the gasket sub-assembly from the outer rear view mirror assembly LH.

    3. A00YXNG

      Using a T25 "TORX" socket wrench, remove the 3 screws.

      Note

      Make sure to replace the "TORX" screws with new ones.

    4. A00YY0F

      Remove the 2 screws and frame sub-assembly as shown in the illustration.

    5. A00YWHF

      Disconnect the connector.

    6. Remove the harness sub-assembly from the frame sub-assembly.

    7. A00YTQA

      Remove the 4 screws and support.