FUEL LID LOCK CONTROL CABLE ASSEMBLY(for LHD) REMOVAL

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY LH


    1. for Manual Seat

      Click here

    2. for Power Seat

      Click here

  2. REMOVE PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

    Click here

  3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  4. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire, for Compact Spare Tire)

    Click here

  5. REMOVE DECK BOARD ASSEMBLY (for Full Size Spare Tire)

    Click here

  6. REMOVE DECK FLOOR BOX LH

    Click here

  7. REMOVE REAR NO. 3 FLOOR BOARD

    Click here

  8. REMOVE REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)

    Click here

  9. REMOVE REAR DECK TRIM COVER (for Full Size Spare Tire)

    Click here

  10. REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE (w/o Spare Tire, for Compact Spare Tire)

    Click here

  11. REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE (for Full Size Spare Tire)

    Click here

  12. REMOVE REAR SEAT ASSEMBLY


    1. for LH Side

      Click here

    2. for RH Side

      Click here

  13. REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

  14. REMOVE COWL SIDE TRIM BOARD LH

    Click here

  15. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  16. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  17. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  18. REMOVE DECK TRIM SERVICE HOLE COVER

    Click here

  19. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  20. REMOVE OUTER LAP BELT ANCHOR COVER (for LH Side)

    Click here

  21. REMOVE LOWER CENTER PILLAR GARNISH LH

    Click here

  22. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. A01V6US

      Remove the bolt and detach the guide.

    2. A01VAZO

      Disconnect the fuel lid lock control cable sub-assembly and remove the fuel lid lock open lever sub-assembly.

  23. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


    1. Partially remove the floor carpet.

      Tech Tips

      It is not necessary to fully remove the floor carpet. Partially remove it so that the fuel lid lock control cable sub-assembly can be removed.

    2. A01V78K

      Detach the 2 claws and disconnect the fuel lid lock control cable sub-assembly from the fuel filler opening lid lock retainer in the direction indicated by the arrow in the illustration.

    3. Detach the 7 clamps and remove the fuel lid lock control cable sub-assembly.

      A01V7Y6

  24. REMOVE FUEL FILLER OPENING LID LOCK RETAINER


    1. A01V8Z9

      Turn the fuel filler opening lid lock retainer counterclockwise and remove the fuel filler opening lid lock retainer as shown in the illustration.