BACK DOOR CLOSER ECU REMOVAL

CAUTION / NOTICE / HINT

Note

When replacing the multiplex network door ECU, the back door automatic open stop position (memory stopped position) is memorized, so be sure to make a note of the automatic open stop position.

PROCEDURE


  1. REMOVE BACK DOOR CENTER GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  5. REMOVE MULTIPLEX NETWORK DOOR ECU


    1. A00YSN8

      Disconnect the 2 connectors.

    2. Remove the 2 bolts.

    3. Detach the clamp and guide and remove the multiplex network door ECU.