POWER BACK DOOR CONTROL SWITCH(for LHD) REMOVAL

PROCEDURE


  1. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  2. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  4. REMOVE UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  5. REMOVE FUSE BOX OPENING COVER

    Click here

  6. REMOVE NO. 2 SWITCH HOLE BASE


    1. A01V8N4

      Detach the 3 clips and claw and remove the No. 2 switch hole base.

  7. REMOVE BACK DOOR CONTROL SWITCH


    1. A01V7U0

      Detach the 2 claws and remove the back door control switch assembly as shown in the illustration.

    2. A01V8CT

      Disconnect the connector.