BACK DOOR WEATHERSTRIP INSTALLATION

PROCEDURE


  1. INSTALL BACK DOOR WEATHERSTRIP


    1. A01PKITC01
      *a Paint Mark
      A01PKQJ Marking Position
      A01PHUR Weatherstrip Joint

      Remove any non-drying sealer on the body with non-residue solvent.

    2. Align the paint marks with the positions on the body flange and install a new back door weatherstrip.

      Note

      Always align the paint mark when installing the part. If the paint mark position is out of place, water leaks may occur.

      Tech Tips

      To easily install the weatherstrip, first install the area with the paint mark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.