HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD) REMOVAL

PROCEDURE


  1. REMOVE FRONT BUMPER COVER

    Click here

  2. REMOVE UPPER RADIATOR AIR GUIDE PLATE

    Click here

  3. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  4. REMOVE HOOD TO FRONT FENDER SEAL RH


    1. A01V7Y0

      Remove the clip.

    2. Detach the 3 clips and remove the hood to front fender seal RH.

  5. REMOVE HOOD TO FRONT FENDER SEAL LH

    Tech Tips

    Use the same procedure described for the RH side.

  6. REMOVE COWL TOP PANEL OUTER SUB-ASSEMBLY

    Click here

  7. REMOVE FRONT DOOR SCUFF PLATE RH

    Click here

  8. REMOVE COWL SIDE TRIM BOARD RH

    Click here

  9. REMOVE FUSE BOX OPENING COVER

    Click here

  10. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A01V7ZI

      Detach the 3 claws.

    2. A01V8E3

      Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.

  11. REMOVE HOOD LOCK CONTROL CABLE COVER (w/ Cover)


    1. A01VAKX

      Detach the clip and guide, and remove the hood lock control cable cover.

  12. REMOVE HOOD LOCK ASSEMBLY


    1. A01V8EZC02
      *A w/ Engine Hood Courtesy Switch
      *B w/o Engine Hood Courtesy Switch

      w/ Engine Hood Courtesy Switch:

      Disconnect the connector.

    2. Remove the 3 bolts.

    3. A01V8BEC02
      *A w/ Engine Hood Courtesy Switch
      *B w/o Engine Hood Courtesy Switch

      Disconnect the hood lock control cable assembly and remove the hood lock assembly.

  13. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY


    1. A01V7D6C04
      Text in Illustration
      *1 String

      Tie a string to the end of the hood lock control cable assembly as shown in the illustration.

      Tech Tips

      Use a length of string long enough to pass through the engine compartment.

    2. Detach each clamp, and then pull out the hood lock control cable assembly from the vehicle body.

    3. Untie the string from the hood lock control cable assembly.

      A01V7OTC03
      Text in Illustration
      *1 Hood Lock Control Cable *2 Stopper