OCCUPANT CLASSIFICATION SYSTEM TERMINALS OF ECU


  1. OCCUPANT DETECTION ECU

    A00YTMPE09

    Tech Tips

    Since the occupant detection ECU uses waterproof connectors, the voltage and waveform cannot be inspected directly. Standard voltage and resistance rereadings and waveforms are indicated for reference only.

    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specification
    d16-1 - d16-3 W - W-B Battery Always 11 to 14 V
    d16-2 - d16-3 GR - W-B Diagnosis (DLC3) Ignition switch ON, GTS not connected to DLC3 -
    d16-3 - Body ground W-B - Body ground Ground Always Below 1 V
    d16-4 - d16-3 LG - W-B Airbag sensor assembly communication line Always Below 1 V
    d16-5 - d16-3 P - W-B Front passenger side buckle switch ground line Always Below 1 V
    d16-6 - d16-3 B - W-B IG power source Ignition switch off Below 1 V
    Ignition switch ON 11 to 14 V
    d16-7 - d16-4 L - LG Airbag sensor assembly communication line Ignition switch ON Pulse generation
    d16-8 - d16-5 G - P Front passenger side buckle switch line Always Pulse generation
    d15-1 - d15-5 GR - W Rear occupant classification sensor LH power supply line Ignition switch ON 4.9 to 5.1 V
    d15-2 - d15-6 V - BR Rear occupant classification sensor RH power supply line Ignition switch ON 4.9 to 5.1 V
    d15-3 - d15-5 SB - W Rear occupant classification sensor LH signal line Ignition switch ON Pulse generation
    d15-4 - d15-6 B - BR Rear occupant classification sensor RH signal line Ignition switch ON Pulse generation
    d15-5 - d16-3 W - W-B Rear occupant classification sensor LH ground line Always Below 1 Ω
    d15-6 - d16-3 BR - W-B Rear occupant classification sensor RH ground line Always Below 1 Ω

  2. AIRBAG SENSOR ASSEMBLY

    Click here