DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Occupant Detection / Data List.
Check the values by referring to the table below.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| IG Switch | Ignition switch condition | ON/OFF | ON: Ignition switch ON OFF: Ignition switch off |
"OFF" is also displayed for this item when the ignition switch is ACC. |
| Passenger Buckle SW | Front seat belt assembly RH buckle switch | Set, Unset or NG | Set: The front seat belt assembly RH is fastened Unset: The front seat belt assembly RH is not fastened NG: Data is not determined |
- |
| Passenger Classification | Front passenger classification | AM50/AF05/Child/CRS/OFF | AM50: Adult is seated AF05: Adult is seated Child: Child is seated CRS: Child restraint system is installed OFF: Vacant |
- |
| Sensor Range Info | Sensor range information | OK/NG | OK: The value of an occupant detection sensor is within the range NG: The value of an occupant detection sensor is over the range |
As sensor range is not set, OK is always displayed |
| FL Sensor Range Info | Front left sensor range information | OK | OK | As front left sensor range is not set, OK is always displayed |
| RL Sensor Range Info | Rear left sensor range information | OK | OK | As rear left sensor range is not set, OK is always displayed |
| FL Sensor Voltage | Front left sensor voltage | Min.: 0 V Max.: 19.8 V |
0 to 5 V | - |
| RL Sensor Voltage | Rear left sensor voltage | Min.: 0 V Max.: 19.8 V |
0 to 5 V | - |
| FL Sensor Weight Info | Front left sensor weight information | Min.: -10 kg (-22.0 lb) Max.: 20 kg (44.1 lb) |
-10 to 20 kg (-22.0 to 44.1 lb) | - |
| RL Sensor Weight Info | Rear left sensor weight information | Min.: -10 kg (-22.0 lb) Max.: 30 kg (66.1 lb) |
-10 to 30 kg (-22.0 to 66.1 lb) | - |
| Total Weight Information | Total weight information | Min.: -40 kg (-88.2 lb) Max.: 100 kg (220.5 lb) |
-40 to 100 kg (-88.2 to 220.5 lb) | - |
| Number of Present DTC | Number of present DTCs recorded | Min.: 0, Max.: 255 | 0 | - |
| Number of Past DTC | Number of past DTCs recorded | Min.: 0, Max.: 255 | 0 | - |