OCCUPANT CLASSIFICATION SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTS on.

    5. Enter the following menus: Body Electrical / Occupant Detection / Data List.

    6. Check the values by referring to the table below.


      Body Electrical > Occupant Detection > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      IG Switch Ignition switch condition ON/OFF

      ON: Ignition switch ON

      OFF: Ignition switch off

      "OFF" is also displayed for this item when the ignition switch is ACC.
      Passenger Buckle SW Front seat belt RH buckle switch Set, Unset or NG

      Set: The front seat belt RH is fastened

      Unset: The front seat belt RH is not fastened

      NG: Data is not determined

      -
      Passenger Classification Front passenger classification AM50/AF05/Child/CRS/OFF

      AM50: Adult is seated

      AF05: Adult is seated

      Child: Child is seated

      CRS: Child restraint system is installed

      OFF: Vacant

      -
      Sensor Range Info Sensor range information OK/NG

      OK: The value of a occupant detection sensor is within the range

      NG: The value of a occupant detection sensor is over the range

      -
      RL Sensor Range Info Rear left sensor range information OK OK -
      RR Sensor Range Info Rear right sensor range information OK OK -
      RL Sensor Voltage Rear left sensor voltage

      Min.: 0 V

      Max.: 19.8 V

      0 to 5 V -
      RR Sensor Voltage Rear right sensor voltage

      Min.: 0 V

      Max.: 19.8 V

      0 to 5 V -
      RL Sensor Weight Info Rear left sensor weight information

      Min.: -10 kg (-22.0 lb)

      Max.: 30 kg (66.1 lb)

      -10 to 30 kg (-22.0 to 66.1 lb) -
      RR Sensor Weight Info Rear right sensor weight information

      Min.: -10 kg (-22.0 lb)

      Max.: 30 kg (66.1 lb)

      -10 to 30 kg (-22.0 to 66.1 lb) -
      Total Weight Information Total weight information

      Min.: -40 kg (-88.2 lb)

      Max.: 100 kg (220.5 lb)

      -40 to 100 kg (-88.2 to 220.5 lb) -
      Number of Present DTC Number of present DTCs recorded Min.: 0, Max.: 255 0 -
      Number of Past DTC Number of past DTCs recorded Min.: 0, Max.: 255 0 -