COMBINATION METER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL COMBINATION METER ASSEMBLY


    1. Connect the 2 connectors.

    2. Attach the 2 clips to install the combination meter assembly.

    3. Install the 2 screws.

  2. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  3. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  4. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here