METER / GAUGE SYSTEM PRECAUTION


  1. IGNITION SWITCH EXPRESSIONS


    1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

      Expression Ignition Switch (Position) Engine Switch (Condition)
      Ignition Switch off LOCK Off (Lock)
      Ignition Switch ACC ACC On (ACC)
      Ignition Switch ON ON On (IG)
      Engine Start START On (Start)

  2. COMBINATION METER ASSEMBLY DISPLAY CHANGE DUE TO BATTERY DISCONNECTION


    1. When the battery is disconnected, the information stored in the combination meter assembly is cleared. As a result, the combination meter assembly display changes back to its default setting.

      for Segment Display Type
      Type Item Name Default Value
      ODO/TRIP ODO/TRIP display ODO display
      Trip A/B 0
      Drive monitor Average fuel consumption 0
      Cruising range 0
      Average vehicle speed 0
      for TFT Display Type
      Type Item Name Default Value
      Meter settings Tab top position Tab top position
      ODO/TRIP ODO/TRIP display ODO display
      Trip A/B 0
      Drive monitor Average fuel consumption (After reset) 0
      Average fuel consumption (After refuel) 0
      Average speed (After reset) 0
      Fuel Saved After Reset* 0
      Elapsed time (After reset) 00:00:00
      Oil maintenance mileage 0
      Distance (Range) 0

      *: w/ Stop and Start System

      Tech Tips

      The displayed contents and opening screen may change when connected ECUs are recognized.