BACK DOOR COURTESY SWITCH INSTALLATION

PROCEDURE

1. INSTALL BACK DOOR LOCK ASSEMBLY (BACK DOOR COURTESY SWITCH)

   
   

   1. w/ Power Back Door:

      
      

      1. Apply MP grease to the sliding parts of the back door lock assembly (back door courtesy switch).

      2. Attach the clamp to install the back door lock assembly (back door courtesy switch).

      3. Install the 4 bolts.

         Torque:

         7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

      4. Connect the connector.

   2. w/o Power Back Door:

      
      

      1. Apply MP grease to the sliding parts of the back door lock assembly (back door courtesy switch).

      2. Install the back door lock assembly (back door courtesy switch) with the 3 bolts.

         Torque:

         7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

      3. Connect the connector.

2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

   Click here

3. INSTALL BACK DOOR SIDE GARNISH LH

   Click here

4. INSTALL BACK DOOR SIDE GARNISH RH

   Click here

5. INSTALL CENTER BACK DOOR GARNISH

   Click here