METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Utility / Customize / Warning or Display.

      5. Select the setting by referring to the table below.

      6. for Segment Display Type:


        Warning
        Tester Display Description Default Setting ECU
        Key Remind Sound Function to change the key reminder buzzer sound frequency Normal 00:Normal,01:Slow,10:Fast Combination meter assembly
        Driver Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
        Front Passenger Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
        Lane Change Flashing Times Setting Function to change the lane change flashing time 3 00:OFF,01:3,10:5,11:7 Combination meter assembly

        • *: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.


        Display
        Tester Display Description Default Setting ECU
        ECO Drive Indicator Zone Function to enable or disable the eco driving indicator zone display in the multi-information display ON 0:OFF,1:ON Combination meter assembly
        ODO Display Time After IG OFF Setting Function to change the odometer display time 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly

        Unit conversion
        Tester Display Description Default Setting ECU
        Units By Region Function to change the multi-information display unit Km/l 000:Km/l JP,100:Km/l,010:Ml/g US,110:Ml/g UK,001:km/g Combination meter assembly

      7. for Dot Display Type:


        Warning
        Tester Display Description Default Setting ECU
        Key Remind Sound Function to change the key reminder buzzer sound frequency Normal 00:Normal,01:Slow,10:Fast Combination meter assembly
        Driver Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
        Front Passenger Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
        Rear Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
        Lane Change Flashing Times Setting Function to change the lane change flashing time 3 00:OFF,01:3,10:5,11:7 Combination meter assembly

        Display
        Tester Display Description Default Setting ECU
        ECO Drive Indicator Zone Function to enable or disable the eco driving indicator zone display in the multi-information display ON 0:OFF,1:ON Combination meter assembly
        ODO Display Time After IG OFF Setting Function to change the odometer display time 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly

    2. Customizing with the combination meter assembly


      1. Turn the ignition switch to ON.

      2. Select the setting by referring to the table below.

        for Dot Display Type
        Display Default Content Setting Relevant ECU
        LANGUAGE ENGLISH Function to change the multi-information display language ENGLISH, FRANCAIS, DEUTSCH, ITALIANO, ESPANOL or PYCCKNN Combination meter assembly
        UNIT miles Function to change the multi-information display unit miles or km (l/100 km) Combination meter assembly
        ECO indicator* ON Function to turn on/off the eco driving indicator light ON or OFF Combination meter assembly

        • *: except Manual Transaxle

        for Segment Display Type
        Setting Part Default Content Setting Relevant ECU
        Eco driving indicator light* Eco On Function to turn on/off the eco driving indicator light Eco On or Eco OFF Combination meter assembly

        • *: except Manual Transaxle