METER / GAUGE SYSTEM OPERATION CHECK

INSPECT INDICATOR/WARNING LIGHT

1. Check the following indicators and warning lights.

   Indicator/Warning Light	Switch Condition	Specified Condition
   Headlight beam level control system indicator light*6*9	Ignition switch off → ON	Comes on for 3 seconds
   LED headlight indicator light*6*10
   Brake warning light
   Engine coolant temperature warning light*6
   Oil level indicator light*6*11
   Sedimenter warning light*6*11
   DPF warning light*6*11
   Stop and start indicator light*8
   Stop and start cancel indicator light*8
   Slip indicator light
   VSC OFF indicator light
   TRAC OFF indicator light*1*6
   ABS warning light
   Tire pressure warning light*2
   Eco driving indicator light
   Master caution warning light*5
   MAINT REQD indicator light*6
   AUTO LSD indicator light
   Downhill assist control indicator light*7
   Automatic High Beam indicator light*4
   AWD warning light*1*6	Ignition switch off → ON	Comes on for 4 seconds
   AWD lock indicator light*1
   SRS warning light	Ignition switch off → ON	Comes on for 6 seconds
   Charge warning light*6	Ignition switch off → ON	Illuminates when ignition switch turned ON Turns off when engine started
   Shift up indicator light*3*6
   Shift down indicator light*3*6
   Engine oil pressure warning light*6
   A/T OIL TEMP warning light*6
   EPS warning light
   MIL

   
   

   • *1: for 4WD/AWD

   • *2: w/ Tire Pressure Warning System

   • *3: for Manual Transaxle

   • *4: w/ Automatic High Beam System

   • *5: for TFT Display type

   • *6: for Segment Display type

   • *7: w/ Downhill Assist Control System

   • *8: w/ Stop and Start System

   • *9: w/ Automatic Headlight Beam Level Control System

   • *10: w/ LED Headlight

   • *11: Engine Type Diesel

INSPECT SPEEDOMETER

1. Connect the GTS to the DLC3.

2. Turn the ignition switch to ON.

3. Turn the GTS on.

4. Enter the following menus: Powertrain / ABS/VSC/TRC / Data List.

   
   Chassis > ABS/VSC/TRC > Data List

   Tester Display
   Vehicle Speed

   for Australia

   Standard Indication	Acceptable Range
   20 km/h	20.3 to 24.3 km/h
   40 km/h	40.6 to 45.1 km/h
   60 km/h	60.9 to 65.4 km/h
   80 km/h	81.2 to 86.2 km/h
   100 km/h	101.5 to 105.5 km/h
   120 km/h	121.8 to 126.8 km/h
   140 km/h	142.1 to 147.1 km/h
   160 km/h	162.4 to 167.4 km/h
   180 km/h	182.7 to 187.7 km/h
   200 km/h	203 to 208 km/h
   220 km/h	223.3 to 228.3 km/h
   240 km/h*	243.6 to 248.6 km/h
   260 km/h*	263.9 to 268.9 km/h

   *: for TFT Type

   except Australia (km/h)

   Standard Indication	Acceptable Range
   20 km/h	21 to 25 km/h
   40 km/h	41.7 to 46.2 km/h
   60 km/h	62.7 to 67.2 km/h
   80 km/h	83.4 to 88.4 km/h
   100 km/h	104.3 to 109.3 km/h
   120 km/h	125.1 to 130.6 km/h
   140 km/h	145.8 to 151.8 km/h
   160 km/h	166.2 to 173.2 km/h
   180 km/h	186.9 to 194.5 km/h
   200 km/h	207.7 to 215.7 km/h
   220 km/h	228.4 to 236.8 km/h
   240 km/h*	245.2 to 250.2 km/h
   260 km/h*	270 to 279.2 km/h

   *: for TFT Type

   except Australia (MPH)

   Standard Indication	Acceptable Range
   20 MPH	21 to 23.5 MPH
   40 MPH	42 to 44.5 MPH
   60 MPH	62.5 to 66 MPH
   80 MPH	83.1 to 87.1 MPH
   100 MPH	103.9 to 108.4 MPH
   120 MPH	124.7 to 129.6 MPH
   140 MPH	145.4 to 150.7 MPH
   160 MPH	166.2 to 161.9 MPH
   180 MPH	187 to 193 MPH

   If the result is not as specified, the speedometer may have a malfunction.

   Note

   Do not use worn, underinflated or overinflated tires as the speedometer reading will be inaccurate.

5. Check the deflection width of the speedometer indicator.

   INSPECT TACHOMETER

   
   

   1. Connect a tune-up tachometer and start the engine.

   2. Compare the test results with the tachometer indicator.

   DC 13.5 V at 25°C (77°F)

   Standard Indication (rpm)	Acceptable Range Data in ( ) is for Reference
   700	670 to 810
   1000	(957 to 1157)
   2000	(1964 to 2264)
   3000	2971 to 3371
   4000	(4028 to 4428)
   5000	5085 to 5485
   6000	(6091 to 6591)
   7000	7098 to 7698
   8000	(8155 to 8755)