FOOTWELL LIGHT(for Front Passenger Side) INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY


    1. Check the illumination.


      1. A01V7W7C02
        *a

        Component without harness connected

        (No. 1 Interior Illumination Light Assembly)

        Apply battery voltage to the connector and check the illumination conditions.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → G201 - 2 (B)

        Battery negative (-) → G201 - 1 (L)

        		 Illuminates

        If the result is not as specified, replace the No. 1 interior illumination light assembly.