VANITY LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY LH


    1. A00YX3SC01
      *1 Protective Tape

      Using a screwdriver, detach the claw.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Detach the guide to disconnect the vanity light assembly LH.

    3. A00YTI0

      Detach the 2 claws to remove the vanity light assembly LH from the No. 1 roof wire.

  2. REMOVE VANITY LIGHT BULB


    1. A00YRDS

      Remove the vanity light bulb from the No. 1 roof wire.