LIGHTING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List / All Data.

    5. According to the display on the GTS, read the Data List.


      Body Electrical > Main Body > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      ACC SW Ignition switch ACC signal ON or OFF

      ON: Ignition switch ACC

      OFF: Ignition switch off

      		 "ON" is also displayed for this item when the ignition switch is ON.
      IG SW Ignition switch ON signal ON or OFF

      ON: Ignition switch ON

      OFF: Ignition switch off

      		 "OFF" is also displayed for this item when the ignition switch is ACC.
      RR Door Courtesy SW Rear door courtesy light switch RH signal ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 -
      RL Door Courtesy SW Rear door courtesy light switch LH signal ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      Back Door Courtesy SW Back door courtesy light switch signal ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      FR Door Lock Pos Front door unlock detection switch RH signal UNLOCK or LOCK

      UNLOCK: Front door RH unlocked

      LOCK: Front door RH locked

      		 -
      FR Door Courtesy SW Front door courtesy light switch RH signal ON or OFF

      ON: Front door RH open

      OFF: Front door RH closed

      		 -
      FL Door Lock Pos Front door unlock detection switch LH signal UNLOCK or LOCK

      UNLOCK: Front door LH unlocked

      LOCK: Front door LH locked

      		 -
      FL Door Courtesy SW Front door courtesy light switch LH signal ON or OFF

      ON: Front door LH open

      OFF: Front door LH closed

      		 -
      RR-Door Lock Pos SW LH and RH side rear door unlock detection switch signal ON or OFF

      ON: LH or RH side rear door unlocked

      OFF: LH and RH side rear door locked

      		 w/ Entry and Start System or Theft Deterrent System
      RL-Door Lock Pos SW LH and RH side rear door unlock detection switch signal ON or OFF

      ON: LH or RH side rear door unlocked

      OFF: LH and RH side rear door locked

      		 w/ Entry and Start System or Theft Deterrent System
      Interior Light Control Function which controls interior lights ON or OFF Customized setting displayed Vehicles displaying the Item "Interior Light Control" on the GTS.
      I/L ON W/Door Key Unlock Function which turns on interior lights when door is unlocked ON or OFF Customized setting displayed -
      Lighting Time Lighting time after closing all doors 7.5 s, 15 s or 30 s Customized setting displayed -
      Room Light when Aprchd Function which turns on room lights when key is brought within vehicle exterior detection area ON or OFF Customized setting displayed w/ Entry and Start System
      Inside Foot Light Changes the interior footwell lights control. ON or OFF Customized setting displayed w/ Footwell Light
      I/L when ACC OFF Function which turns on lights when ignition switch is turned from ON or ACC to off ON or OFF Customized setting displayed -
      Light Control Function that lights up the ambient lights. ON or OFF Customized setting displayed

      • Although the item is displayed on the GTS, it is not applicable to this vehicle.

      • Vehicles displaying the Item "Light Control" on the GTS.

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Active Test.

    5. According to the display on the GTS, perform the Active Test.


      Body Electrical > Main Body > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Illuminated Entry System Map light, ignition key cylinder light (w/o Entry and Start System) and No. 1 room light ON or OFF Turn the map light switch and No. 1 room light switch to the DOOR position.
      Fr Foot Light Footwell light ON or OFF w/ Footwell Light
      Relay for Interior Light Auto Cut Function DOME CUT relay ON or OFF -

      Body Electrical > Entry&Start > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Power/Engine SW Light Engine switch Illumination ON or OFF w/ Entry and Start System