LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (INT)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS.


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Utility / Customize / (desired system).

      5. Select the setting by referring to the table below.


        Illuminated Entry
        Tester Display Description Default Setting ECU
        Lighting Time Changes the lighting time after closing all of the doors [It will fade out immediately when turning the ignition switch from off to ACC or ON]. 15 s 10:30 s,00:15 s,01:7.5 s Main body ECU (Multiplex Network Body ECU)
        I/L when ACC OFF A function that turns on the interior lights when the ignition switch is turned from ON or ACC to off (the interior lights turn on when the map light switch and No. 1 room light switch are set to DOOR). ON 0:OFF,1:ON Main body ECU (Multiplex Network Body ECU)
        I/L ON W/Door Key Unlock A function that turns on the interior lights when the door is unlocked (the interior lights turn on when the map light switch and No. 1 room light switch are set to DOOR). ON 0:OFF,1:ON Main body ECU (Multiplex Network Body ECU)
        Room Light when Aprchd A function that turns on the room lights when the key is brought within the vehicle exterior detection area (the room lights turns on when the map light switch and No. 1 room light switch are set to DOOR).* ON 0:OFF,1:ON Main body ECU (Multiplex Network Body ECU)
        Interior Light Control This function control the interior lights ON 0:OFF,1:ON Main body ECU (Multiplex Network Body ECU)

        *: w/ Entry and Start System