ENGINE HOOD COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)


    1. A00YXM8C01
      *1 Open
      *2 Lock
      *a

      Component without harness connected

      Hood Lock Assembly (Engine Hood Courtesy Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Opened 10 kΩ or higher
      1 - 2 Locked Below 1 Ω

      If the result is not as specified, replace the hood lock assembly (engine hood courtesy switch).