INTRUSION SENSOR INSTALLATION

PROCEDURE

1. INSTALL THEFT WARNING RADAR SENSOR

   
   

   1. Install the theft warning radar sensor with the 4 screws.

   2. w/ Sliding Roof:

      
      

      1. Attach the 2 claws and install the overhead junction block assembly.

      2. Install the 6 screws.

   3. w/o Sliding Roof:

      
      

      1. Attach the 2 claws and install the overhead junction block assembly.

      2. Install the 5 screws.

   4. w/ Sliding Roof:

      
      

      1. Connect the connectors.

      2. Attach the 2 clamps and install the 2 screws.

   5. w/o Sliding Roof:

      
      

      1. Connect the connectors.

      2. Attach the 3 clamps and install the 2 screws.

2. INSTALL AMPLIFIER MICROPHONE ASSEMBLY

   Click here

3. INSTALL MAP LIGHT ASSEMBLY

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here