THEFT DETERRENT SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. According to the display on the GTS, read the Data List.


      Body Electrical > Main Body > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Key Unlock Warning SW Unlock warning switch*1 ON or OFF

      ON: Key inserted into ignition key cylinder

      OFF: Key removed from ignition key cylinder

      		 -
      ACC SW Ignition switch ON or OFF

      ON: Ignition switch ACC

      OFF: Ignition switch off

      		 "ON" is also displayed for this item when the ignition switch is ON.
      IG SW Ignition switch ON or OFF

      ON: Ignition switch ON

      OFF: Ignition switch off or ACC

      		 "OFF" is also displayed for this item when the ignition switch is ACC.
      RR Door Courtesy SW Rear door courtesy light switch RH ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 -
      RL Door Courtesy SW Rear door courtesy light switch LH ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      Back Door Courtesy SW Back door courtesy light switch ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      FR Door Lock Pos Front door RH unlock detection switch LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy SW Front door courtesy light switch RH ON or OFF

      ON: Front door RH open

      OFF: Front door RH closed

      		 -
      FL Door Lock Pos Front door LH unlock detection switch LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy SW Front door courtesy light switch LH ON or OFF

      ON: Front door LH open

      OFF: Front door LH closed

      		 -
      Hood Courtesy SW Engine hood courtesy switch ON or OFF

      ON: Engine hood open

      OFF: Engine hood closed

      		 -
      RR-Door Lock Pos SW LH and RH side rear door unlock detection switch signal ON or OFF

      ON: Rear door RH or LH unlocked

      OFF: Rear door RH and LH locked

      		 -
      RL-Door Lock Pos SW LH and RH side rear door unlock detection switch signal ON or OFF

      ON: Rear door LH or RH unlocked

      OFF: Rear door LH and RH locked

      		 -
      Intrusion Sens OFF SW Intrusion sensor cancel switch*2 ON or OFF

      ON: Intrusion sensor cancel switch on

      OFF: Intrusion sensor cancel switch off

      		 -
      Intrusion Sensor Status of the intrusion sensor detection*2 ON or OFF

      ON: Intrusion sensor detected

      OFF: Intrusion sensor not detected

      		 -
      Tilt Sensor Status of the tilt sensor detection*3 ON or OFF

      ON: Tilt sensor detected

      OFF: Tilt sensor not detected

      		 -
      Intrusion Sen Conn Intrusion sensor connecting*2 ON or OFF

      ON: Intrusion sensor connected

      OFF: Intrusion sensor not connected

      		 -
      Tilt Sensor Connect Tilt sensor connecting*3 ON or OFF

      ON: Tilt sensor connected

      OFF: Tilt sensor not connected

      		 -
      Sealed Glas Brak Sen Glass breakage sensor connecting*4 With or Without

      With: Glass breakage sensor connected

      Without: Glass breakage sensor not connected

      		 -
      Slide Roof Open Warning This function is used to enable or disable the sliding roof open warning*5 ON or OFF Customization status displayed -
      Warning by Horn Function that allows vehicle horns and theft deterrent horn to be used as warning device*6 ON or OFF Customization status displayed -
      Intrusion Win Opened This function is used to enable or disable the window open warning ON or OFF Customization status displayed -
      Security control with mechanism key This function makes it possible to cancel the security alarm with the mechanical key*7 ON or OFF Customization status displayed -
      Intrusion Sensor Function This function is used to enable or disable the intrusion sensor warning*8 ON or OFF Customization status displayed -

      • *: w/o Entry and Start System

      • *2: w/ Intrusion Sensor

      • *3: w/ Tilt Sensor

      • *4: w/ Glass Breakage Sensor

      • *5: w/ Sliding Roof System

      • *6: w/o Follow Me Home

      • *7: w/ Follow Me Home

      • *8: for Australia, New Zealand

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body, Entry&Start*1 or Immobiliser*2 / Active Test.


      • *1: w/ Entry and Start System

      • *2: w/o Entry and Start System

    5. According to the display on the GTS, perform the Active Test.


      Body Electrical > Main Body > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Security Indicator Security indicator*1 ON or OFF -
      Security Horn2 Theft warning siren*2 ON or OFF -
      Vehicle Horn Vehicle horn ON or OFF -
      Security Horn Security horn*3 ON or OFF -
      Power For Intrusion Sensor Intrusion sensor power supply*4 ON or OFF -
      Power For Tilt Sensor Tilt sensor power supply*5 ON or OFF -

      • *1: w/o Entry and Start System

      • *2: w/ Theft Warning Siren

      • *3: w/ Security Horn Assembly

      • *4: w/ Intrusion Sensor

      • *5: w/ Tilt Sensor


      Body Electrical > Entry&Start > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Immobiliser Indicator Security indicator* ON or OFF -

      • *: w/ Entry and Start System


      Body Electrical > Immobiliser > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Security Indicator Security indicator* ON or OFF -

      • *: w/o Entry and Start System