REAR SEAT ASSEMBLY(for RH Side) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seatback frame, seat cushion frame and reclining adjuster may injure your hands.

PROCEDURE


  1. REMOVE REAR SEAT HEADREST ASSEMBLY

  2. REMOVE REAR SEAT COVER CAP RH


    1. A00YRJHC01
      *1 Protective Tape

      Using a screwdriver, detach the 3 claws to remove the rear seat cover cap RH.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH


    1. A00YVSY

      Remove the 3 screws and reclining adjuster release handle RH.

  4. REMOVE REAR SEAT NO. 1 CUSHION HINGE COVER


    1. A00YTTF

      Using a screwdriver, detach the 4 claws and clamp to remove the rear seat No. 1 cushion hinge cover.

  5. REMOVE REAR SEAT NO. 2 CUSHION HINGE COVER


    1. A00YQZ2

      Detach the clamp.

    2. A00YSX4

      Using a screwdriver, detach the 4 claws and clamp to remove the rear seat No. 2 cushion hinge cover.

  6. REMOVE NO. 1 SEAT CUSHION ASSEMBLY RH


    1. A00YSLY

      Remove the 2 bolts and 2 bushes and then lift up the cushion as shown in the illustration.

    2. A00YVBLE01

      Detach the clamp of the cable end.

    3. Disconnect the cable in the order shown in the illustration.

    4. A00YWTV

      Remove the 3 clamps.

    5. A00YTJ9C01
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws to remove the rear seatback cover.

      Tech Tips

      Tape the screwdriver tip before use.

    6. A00YSJD

      Remove the 2 bolts, 2 bushes and No. 1 seat cushion assembly RH.

  7. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER


    1. A00YWWL

      Detach the 18 hooks and remove the separate type rear seat cushion cover (with pad) from the rear seat cushion frame sub-assembly RH.

    2. A00YRNN

      Remove the hog ring.

    3. A00YUKC

      Remove the 13 hog rings and separate type rear seat cushion cover from the rear seat cushion pad RH.

  8. REMOVE REAR SEATBACK COVER RH


    1. A00YVW5

      Remove the clip and screw.

    2. Using a screwdriver, detach the claw to remove the rear seatback cover RH.

  9. REMOVE REAR SEAT COVER


    1. A00YR08

      Remove the clip and screw.

    2. Using a screwdriver, detach the claw to remove the rear seat cover.

  10. REMOVE REAR SEAT CUSHION MOULDING RH


    1. A00YUVD

      Using a screwdriver, detach the claw and 2 clamps to remove the rear seat cushion moulding RH.

  11. REMOVE REAR SEAT REAR CUSHION MOULDING RH


    1. A00YXR0

      w/ Seat belt warning system:

      Detach the 2 clamps.

    2. Detach the claw and clamp to remove the rear seat rear cushion moulding RH.

  12. REMOVE NO. 2 SEAT ADJUSTER CONTROL CABLE ASSEMBLY


    1. A00YULZE01

      Detach the 2 clamps of the cable ends.

    2. Disconnect the 2 cables in the order shown in the illustration.

    3. Detach the 4 clamps to remove the No. 2 seat adjuster control cable assembly.

  13. REMOVE REAR SEAT CENTER LAP TYPE BELT ASSEMBLY RH

    Click here

  14. REMOVE REAR SEAT INNER BELT ASSEMBLY RH

    Click here

  15. REMOVE NO. 1 SEATBACK ASSEMBLY RH


    1. A00YUU1

      Remove the 2 bolts and No. 1 seatback assembly RH from the rear seat reclining adjuster assembly RH.

  16. REMOVE REAR SEATBACK BOARD RH


    1. A00YW7Y

      Remove the 4 hog rings and detach the 2 pieces of fastening tape.

    2. A00YRHE

      Detach the 5 claws and clamp to remove the rear seatback board RH.

  17. REMOVE REAR SEAT HEADREST SUPPORT


    1. A00YRQU

      Detach the 4 claws to remove the 2 rear seat headrest supports.

  18. REMOVE SEPARATE TYPE REAR SEATBACK COVER


    1. A00YRHL

      Detach the 2 clamps and remove the separate type rear seatback cover (with pad) from the rear seat cushion frame sub-assembly RH.

    2. A00YRTZ

      Remove the 2 hog rings.

    3. A00YUHU

      Remove the 11 hog rings and separate type rear seatback cover from the rear seat cushion pad RH.