DOOR CONTROL RECEIVER INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL DOOR CONTROL AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY (w/ Tire Pressure Warning System)

   
   

   1. 

      Install the door control and tire pressure monitoring system receiver assembly with the bolt.

      Torque:

      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

   2. Connect the connector.

2. INSTALL DOOR CONTROL RECEIVER (w/o Tire Pressure Warning System)

   
   

   1. 

      Install the door control receiver with the bolt.

      Torque:

      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

   2. Connect the connector.

3. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

   Click here

4. INSTALL SEAT BELT ANCHOR COVER CAP

   Click here

5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

   Click here

6. INSTALL DECK TRIM SERVICE HOLE COVER

   Click here

7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

   Tech Tips

   Use the same procedure described for the LH side.

   Click here

8. INSTALL REAR DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure described for the LH side.

   Click here

9. INSTALL REAR SEAT ASSEMBLY

   Click here

10. INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

    Click here

11. INSTALL REAR DECK TRIM COVER (for Full Size Spare Tire)

    Click here

12. INSTALL REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)

    Click here

13. INSTALL REAR NO. 2 FLOOR BOARD

    Tech Tips

    Use the same procedure described for the No. 3 rear floor board side.

    Click here

14. INSTALL DECK BOARD ASSEMBLY

    Click here

15. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

16. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

    Click here