DOOR CONTROL RECEIVER INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL DOOR CONTROL RECEIVER

   
   

   1. 

      Install the door control receiver with the bolt.

      Torque:

      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

   2. Connect the connector.

2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

   Click here

3. INSTALL SEAT BELT ANCHOR COVER CAP

   Click here

4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

   Click here

5. INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

   Click here

6. INSTALL REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)

   Click here

7. INSTALL REAR DECK TRIM COVER (for Full Size Spare Tire)

   Click here

8. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire, for Compact Spare Tire)

   Click here

9. INSTALL DECK BOARD ASSEMBLY (for Full Size Spare Tire)

   Click here

10. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

11. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

    Click here

12. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

13. INSTALL REAR DOOR SCUFF PLATE RH

    Click here