DOOR CONTROL SWITCH INSPECTION

PROCEDURE


  1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side)


    1. A00YSXUC01
      *a Unlock
      *b Lock
      *c

      Component without harness connected

      (Power Window Regulator Master Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      2 (L) - 1 (E) Lock Below 1 Ω
      2 (L) - 1 (E) Off 10 kΩ or higher
      9 (UL) - 1 (E) Unlock Below 1 Ω
      9 (UL) - 1 (E) Off 10 kΩ or higher

      If the result is not as specified, replace the power window regulator master switch assembly.

  2. INSPECT DOOR CONTROL SWITCH (for Front Passenger Side)


    1. A00YT0VC01
      *a Unlock
      *b Lock
      *c

      Component without harness connected

      (Door Control Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      4 (L) - 3 (E) Lock Below 1 Ω
      4 (L) - 3 (E) Off 10 kΩ or higher
      2 (UL) - 3 (E) Unlock Below 1 Ω
      2 (UL) - 3 (E) Off 10 kΩ or higher

      If the result is not as specified, replace the door control switch.