TRANSMITTER BATTERY(w/o Entry and Start System) REPLACEMENT

PROCEDURE


  1. REMOVE TRANSMITTER HOUSING COVER (for Type A)


    1. A01QPJXC02
      *1 Protective Tape

      Using a precision screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.

      Note

      Do not forcibly pry the cover.

      Tech Tips


      • Tape the screwdriver tip before use.

      • Open the cover as shown in the illustration so as not to drop the button.

  2. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type A)


    1. A01QTC7C02
      *1 Protective Tape

      Using a precision screwdriver with its tip wrapped in protective tape, remove the door control transmitter module set sub-assembly from the transmitter housing case.

      Note

      Handle each part with care as they are delicate electrical parts.

      Tech Tips


      • Tape the screwdriver tip before use.

      • When removing the module, be careful not to drop the button.

  3. REMOVE TRANSMITTER BATTERY (for Type A)


    1. A01QPQ2

      Disengage the 7 claws and remove the transmitter battery cover.

    2. A01QQNI

      Remove the transmitter battery (lithium battery: CR2016).

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

  4. REMOVE TRANSMITTER HOUSING COVER (for Type B)

    Note

    Take extra care when handling these precision electronic components.


    1. A01QUBBC01
      A01QSVW Protective Tape

      Insert a precision screwdriver into the gap, and turn the screwdriver to remove the transmitter housing cover.

      Tech Tips

      Tape the screwdriver tip before use.

  5. REMOVE DOOR CONTROL TRANSMITTER PACKING (for Type B)


    1. A01QSNWC01
      A01QSVW Protective Tape

      Insert a precision screwdriver into the door control transmitter packing and turn the screwdriver to remove the door control transmitter packing.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE TRANSMITTER BATTERY (for Type B)


    1. A01QUP4C01
      A01QSVW Protective Tape

      Insert a precision screwdriver into the gap and gently remove the transmitter battery.

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery as the terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Moisture may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      Tech Tips

      Tape the screwdriver tip before use.

  7. INSTALL TRANSMITTER BATTERY (for Type A)


    1. A01QP87

      Install a new transmitter battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

      Note


      • Be careful not to bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

    2. Engage the 7 claws and install the transmitter battery cover.

  8. INSTALL DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type A)


    1. A01QT6C

      Install the door control transmitter module set sub-assembly into the transmitter housing case.

  9. INSTALL TRANSMITTER HOUSING COVER (for Type A)


    1. A01QONV

      Install the transmitter housing cover to the transmitter housing case.

  10. INSTALL TRANSMITTER BATTERY (for Type B)


    1. A01QTMB

      Install a new transmitter battery (lithium battery: CR1620) with the positive (+) side facing upward, as shown in the illustration.

      Note


      • Do not bend the transmitter battery electrode during installation.

      • Keep the inside of the transmitter housing cover free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

  11. INSTALL DOOR CONTROL TRANSMITTER PACKING (for Type B)


    1. A01QR21

      Install the door control transmitter packing by pressing down on it as shown in the illustration.

  12. INSTALL TRANSMITTER HOUSING COVER (for Type B)


    1. A01QTIS

      Install the transmitter housing cover as shown in the illustration.