WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System) TERMINALS OF ECU


  1. CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

    A01KBLMN02
    A01KC99C04
    *A Main Body ECU (Multiplex Network Body ECU) with 1 connector *B Main Body ECU (Multiplex Network Body ECU) with 3 connectors
    *1 Main Body ECU (Multiplex Network Body ECU) - -

    1. Remove the main body ECU (Multiplex network body ECU) from the instrument panel junction block assembly.

      for LHD: Click here

      for RHD: Click here

    2. Measure the voltage and resistance according to the value(s) in the table below.

      Tech Tips

      Measure the values on the wire harness side with the connectors disconnected.

      Tester Connection Wiring Color Terminal Description Condition Specified Condition
      A-11 (GND1) - Body ground - Ground Always Below 1 Ω
      A-30 (BECU) - Body ground - Battery power supply Always 11 to 14 V
      A-29 (ACC) - Body ground - ACC power supply Ignition switch ACC 11 to 14 V
      A-29 (ACC) - Body ground - ACC power supply Ignition switch off Below 1 V
      A-32 (IG) - Body ground - Ignition power supply Ignition switch ON

      11 to 14 V*1

      10.5 to 14 V*2
      A-32 (IG) - Body ground - Ignition power supply Ignition switch off Below 1 V

      *1: w/o Stop and Start System

      *2: w/ Stop and Start System

    3. Install the main body ECU (multiplex network body ECU).

      for LHD: Click here

      for RHD: Click here

    4. Measure the voltage and check for pulses according to the value(s) in the table below.

      Tester Connection Wiring Color Terminal Description Condition Specified Condition
      3E-1 (ACT-) - Body ground BR - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
      3E-1 (ACT-) - Body ground BR - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
      3D-5 (ACT-) - Body ground B - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
      3D-5 (ACT-) - Body ground B - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
      3D-4 (ACT-) - Body ground B - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
      3D-4 (ACT-) - Body ground B - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
      3D-3 (ACT-) - Body ground B - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
      3D-3 (ACT-) - Body ground B - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
      3D-13 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
      3D-13 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
      3D-11 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
      3D-11 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
      3D-12 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
      3D-12 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
      3E-17 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder locked Below 1 V
      3E-17 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
      3E-40 (FLCY) - Body ground W - Body ground Front door LH courtesy light switch input Front door LH open Below 1 V
      3E-40 (FLCY) - Body ground W - Body ground Front door LH courtesy light switch input Front door LH closed Pulse generation
      G78-19 (FRCY) - Body ground L - Body ground Front door RH courtesy light switch input Front door RH open Below 1 V
      G78-19 (FRCY) - Body ground L - Body ground Front door RH courtesy light switch input Front door RH closed Pulse generation
      G78-24 (LCTY) - Body ground

      W - Body ground*2

      SB - Body ground*3

      		 Rear door LH courtesy light switch input Rear door LH open Below 1 V
      G78-24 (LCTY) - Body ground

      W - Body ground*2

      SB - Body ground*3

      		 Rear door LH courtesy light switch input Rear door LH closed Pulse generation
      G78-6 (RCTY) - Body ground Y - Body ground Rear door RH courtesy light switch input Rear door RH open Below 1 V
      G78-6 (RCTY) - Body ground Y - Body ground Rear door RH courtesy light switch input Rear door RH closed Pulse generation
      G78-7 (LSFL) - Body ground B - Body ground Front door LH unlock detection switch input Front door LH unlocked Below 1 V
      G78-7 (LSFL) - Body ground B - Body ground Front door LH unlock detection switch input Front door LH locked Pulse generation
      G78-18 (LSFR) - Body ground P - Body ground Front door RH unlock detection switch input Front door RH unlocked Below 1 V
      G78-18 (LSFR) - Body ground P - Body ground Front door RH unlock detection switch input Front door RH locked Pulse generation
      3E-32 (LSR) - Body ground*1 Y - Body ground Rear door RH unlock detection switch input Rear door RH or LH unlocked Below 1 V
      3E-32 (LSR) - Body ground*1 Y - Body ground Rear door RH unlock detection switch input Rear door RH and LH locked Pulse generation
      3C-41 (LSR) - Body ground*1 Y - Body ground Rear door LH unlock detection switch input Rear door LH or RH unlocked Below 1 V
      3C-41 (LSR) - Body ground*1 Y - Body ground Rear door LH unlock detection switch input Rear door LH and RH locked Pulse generation
      G78-4 (PRG) - Body ground W - Body ground Signal output to door control receiver Key inserted into ignition key cylinder → Key pulled out of ignition key cylinder 11 to 14 V → Pulse generation → 11 to 14 V
      G78-16 (RDA) - Body ground SB - Body ground Signal input from door control receiver Ignition switch off, all doors closed and door control transmitter assembly switch not pressed 11 to 14 V
      Ignition switch off, all doors closed and door control transmitter assembly switch pressed

      Pulse generation

      (0 to 12 V)
      G78-17 (KSW) - Body ground R - Body ground Key unlock warning switch input No key in ignition key cylinder Pulse generation
      G78-17 (KSW) - Body ground R - Body ground Key unlock warning switch input Key in ignition key cylinder Below 1 V

      *1: w/ Theft Deterrent System or Double Locking System

      *2: for LHD

      *3: for RHD

  2. CHECK DOOR CONTROL RECEIVER


    1. Disconnect the M10 door control receiver connector.

      A01KBAVN14

    2. Measure the voltage and resistance according to the value(s) in the table below.

      Tech Tips

      Measure the values on the wire harness side with the connectors disconnected.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      M10-5 (DATA) - Body ground Y - Body ground Battery power supply Always 11 to 14 V
      M10-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

    3. Reconnect the M10 door control receiver connector.

    4. Measure the voltage according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      M10-3 (PRG) - M10-1 (GND) Y - W-B Signal input from main body ECU (multiplex network body ECU) Key inserted into ignition key cylinder → Key pulled out of ignition key cylinder 11 to 14 V → Pulse generation → 11 to 14 V
      M10-2 (CSEL) - M10-1 (GND) R - W-B Signal output to main body ECU (multiplex network body ECU) Ignition switch off, all doors closed and door control transmitter assembly switch not pressed 11 to 14 V
      Ignition switch off, all doors closed and door control transmitter assembly switch pressed

      Pulse generation

      (0 to 12 V)