POWER DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Door Lock.

      5. Select the setting by referring to the table below.


        Door Lock
        Tester Display Description Default Setting ECU
        Unlock Key Twice Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors*1 ON 0:OFF,1:ON Main body ECU (multiplex network body ECU)
        Auto Lock Function that locks all doors when the vehicle speed reaches a certain level

        OFF*1

        ON*2

        		 0:OFF,1:ON Main body ECU (multiplex network body ECU)
        Auto Lock/Shift Function that locks all doors when the shift lever is moved out of P, with the ignition switch ON and all door closed*3

        ON*1

        OFF*2

        		 0:OFF,1:ON Main body ECU (multiplex network body ECU)
        Auto Unlock/Shift Function that unlocks all doors when the shift lever is moved to P from any position other P with the ignition switch ON*3

        ON*1

        OFF*2

        		 0:OFF,1:ON Main body ECU (multiplex network body ECU)
        All Unlock/Open-Close Function that unlocks the other doors when the driver door is opened within 10 seconds after the ignition switch is turned off

        OFF*4

        ON*4

        		 0:OFF,1:ON Main body ECU (multiplex network body ECU)

        • *1: w/ Panic Switch

        • *2: w/o Panic Switch

        • *3: for Automatic Transaxle

        • *4: The default setting differs depending on the vehicle.

    2. Customizing with the display


      1. Turn the ignition switch to ON.

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Auto Lock by Speed

        Off*1

        On*2

        		 Function that locks all doors when the vehicle speed reaches a certain level On or Off Main body ECU (multiplex network body ECU)
        Auto Lock by Shift from P*3

        On*1

        Off*2

        		 Function that locks all doors when the shift lever is moved out of P, with the ignition switch ON and all door closed On or Off Main body ECU (multiplex network body ECU)
        Auto Unlock by Shift to P*3

        On*1

        Off*2

        		 Function that unlocks all doors when the shift lever is moved to P from any position other P with the ignition switch ON On or Off Main body ECU (multiplex network body ECU)

        • *1: w/ Panic Switch

        • *2: w/o Panic Switch

        • *3: for Automatic Transaxle