FRONT SEAT ASSEMBLY(for Power Seat) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing.

    Click here

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

      Click here

    • If the side airbag has deployed, replace the front seat airbag assembly LH, separate type front seatback spring assembly LH, separate type front seatback pad and separate type front seatback cover with the necessary parts in accordance with the extent of the collision damage.

  2. REMOVE FRONT SEAT HEADREST ASSEMBLY


    1. Remove the front seat headrest assembly.

  3. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER LH


    1. Operate the front power seat switch (slide switch) to move the seat to the rearmost position.

    2. A01V9LXC01
      A01V9RL First
      A01V8SA Second

      Detach the 2 claws to remove the front outer seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.

  4. REMOVE FRONT INNER SEAT TRACK BRACKET COVER LH


    1. A01VATMC01
      A01V9RL First
      A01V8SA Second

      Detach the 2 claws to remove the front inner seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.

  5. REMOVE REAR OUTER SEAT TRACK BRACKET COVER LH


    1. Operate the front power seat switch (slide switch) to move the seat to the foremost position.

    2. A01V8W8C01
      A01V9RL First
      A01V8SA Second

      Detach the 2 claws to remove the rear outer seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.

  6. REMOVE REAR INNER SEAT TRACK BRACKET COVER LH


    1. A01V93SC01
      A01V9RL First
      A01V8SA Second

      Detach the 2 claws to remove the rear inner seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.

  7. REMOVE FRONT SEAT ASSEMBLY LH


    1. A01VB2F

      Remove the 2 bolts.

    2. Operate the front power seat switch (slide switch) to move the seat to the rearmost position.

    3. A01V8RD

      Remove the 2 bolts.

    4. Operate the front power seat switch (slide switch) to align the front side of the inner adjuster with the front side of the outer adjuster.

    5. Disconnect the cable from the negative (-) battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the battery negative (-) terminal to disable the SRS system.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here

    6. A01V9FXC01
      *A w/ Seat Heater System
      *B w/ Front Seat Side Airbag

      Detach the clamp and disconnect the connector of the front seat inner belt assembly LH.

    7. w/ Seat Heater System:

      Disconnect the connector of the seat heater.

    8. w/ Front Seat Side Airbag:

      Disconnect the connector of the front seat airbag assembly LH.


      1. Place a finger on the slider, slide the slider to release the lock, and then disconnect the front seat side airbag connector.

        A01V9QAC06
        *1 Slider - -

    9. Remove the front seat assembly LH from the vehicle.

      Note

      Be careful not to damage the vehicle body.