FRONT SEAT ASSEMBLY(for Power Seat) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL FRONT SEAT ASSEMBLY LH


    1. Place the front seat assembly LH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A01V9FXC01
      *A w/ Seat Heater System
      *B w/ Front Seat Side Airbag

      Attach the clamps to connect the connector of the front seat inner belt assembly LH.

    3. w/ Front Seat Side Airbag:

      Connect the connector of the front seat airbag assembly LH.

    4. w/ Seat Heater System:

      Connect the connector of the seat heater.

    5. Temporarily install the front seat assembly with the 4 bolts.

    6. Connect the cable to the negative (-) battery terminal.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here

    7. Operate the front power seat switch (slide switch) to move the seat to the rearmost position.

    8. A01V8RD

      Tighten the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    9. Operate the front power seat switch (slide switch) to move the seat to the foremost position.

    10. A01VB2F

      Tighten the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    11. During sliding operation of the front seat, check that the left and right adjusters move together smoothly and lock simultaneously. If the seat adjusters do not lock simultaneously, loosen the seat mounting bolts to adjust the adjuster position.

  2. INSTALL REAR OUTER SEAT TRACK BRACKET COVER LH


    1. A01V6Q6C01
      A01V9RL First
      A01V8SA Second

      Attach the 2 claws to install the rear outer seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.

  3. INSTALL REAR INNER SEAT TRACK BRACKET COVER LH


    1. A01V6QEC01
      A01V9RL First
      A01V8SA Second

      Attach the 2 claws to install the rear inner seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.

  4. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER LH


    1. Operate the front power seat switch (slide switch) to move the seat to the rearmost position.

    2. A01VA7ZC01
      A01V9RL First
      A01V8SA Second

      Attach the 2 claws to install the front outer seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.

  5. INSTALL FRONT INNER SEAT TRACK BRACKET COVER LH


    1. A01V85PC01
      A01V9RL First
      A01V8SA Second

      Attach the 2 claws to install the front inner seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.

  6. INSTALL FRONT SEAT HEADREST ASSEMBLY


    1. Install the front seat headrest assembly.

  7. CHECK SRS WARNING LIGHT (w/ Front Seat Side Airbag)

    Click here

  8. INSPECT FRONT POWER SEAT CONTROL SYSTEM

    Click here

  9. INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)

    Click here