PRE-CRASH SAFETY SYSTEM, Diagnostic DTC:C1A63
| DTC Code | DTC Name |
|---|---|
| C1A63 | Other System Malfunction |
DESCRIPTION
The driving support ECU assembly receives accelerator pedal position sensor signals from the ECM to determine if the accelerator pedal is being depressed. If the ECM detects a malfunction in the accelerator pedal position sensor or SFI system or ECD system, the driving support ECU assembly is notified via CAN communication and stores DTC C1A63.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1A63 | Other System Malfunction | With the ignition switch ON, the driving support ECU assembly receives an accelerator pedal position sensor malfunction signal from the ECM for approximately 2 seconds or more. |
|
PROCEDURE
-
GO TO SFI SYSTEM OR ECD SYSTEM
Tech Tips
If DTC C1A63 is output by the pre-crash safety system, perform troubleshooting for the SFI system or ECD system.
-
SFI System:
-
for 2AR-FE (w/ Canister Pump Module):
-
for 2AR-FE (w/o Canister Pump Module):
-
for 3ZR-FAE:
-
for 3ZR-FE (for K111, K111F):
-
for 3ZR-FE (except K111, K111F):
-
ECD System:
-
for 2AD-FHV:
-
for 2AD-FTV (for DPF):
-
for 2WW:
Result Proceed to NEXT
NEXT 
END
-