REAR SEAT ASSEMBLY(for LH Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seatback frame, seat cushion frame and reclining adjuster may injure your hands.

PROCEDURE


  1. INSTALL SEAT LEG BRACKET


    1. A01QOGU

      Attach the guide.

    2. Attach the clamp and install the seat leg bracket with the 4 bolts.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSTALL REAR SEAT ASSEMBLY LH


    1. Fully tilt the seatback forward.

    2. Place the rear seat assembly LH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    3. Temporarily install the rear seat assembly LH with the 5 bolts.

    4. A01QOH0N01

      Tighten the 3 bolts on the rear side of the seat.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Tech Tips

      Tighten the bolts in the order indicated in the illustration.

    5. w/ Seat Belt Warning System:

      Connect the connector.

    6. A01QTND

      w/ Seat Heater System:


      1. Attach the wire harness clamp.

      2. Connect the connector.

    7. A01QSRJN01

      Tighten the 2 bolts on the front side of the seat.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Tech Tips

      Tighten the bolts in the order indicated in the illustration.

  3. INSTALL REAR SEAT NO. 3 LEG SIDE COVER

    A01QOKL

    1. Attach the 2 guides and 4 claws to install the rear seat No. 3 leg side cover in the direction shown by the arrow in the illustration.

  4. INSTALL REAR SEAT FRONT BRACKET COVER LH


    1. A01QP6N

      Attach the 4 claws to install the rear seat front bracket cover LH.

  5. CHECK SEAT HEATER SYSTEM

    Click here