REAR SEAT ASSEMBLY(for LH Side) INSTALLATION

PROCEDURE


  1. INSTALL SEAT LEG BRACKET


    1. Attach the guide.

    2. Attach the clamp and install the seat leg bracket with the 4 bolts.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSTALL REAR SEAT ASSEMBLY LH


    1. Fully tilt the seatback forward.

    2. Place the rear seat assembly LH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    3. Temporarily install the rear seat assembly LH with the 5 bolts.

    4. Lift up the seat track adjusting handle and move the seat to the foremost position.

    5. A00YX39E01

      Tighten the 3 bolts on the rear side of the seat.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Tech Tips

      Tighten the bolts in the order indicated in the illustration.

    6. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    7. A00YVR2E01

      Tighten the 2 bolts on the front side of the seat.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Tech Tips

      Tighten the bolts in the order indicated in the illustration.

  3. INSTALL REAR SEAT NO. 3 LEG SIDE COVER

    A00YRIO

    1. Attach the 2 guides and 4 claws to install the rear seat No. 3 leg side cover in the direction shown by the arrow in the illustration.

  4. INSTALL REAR SEAT FRONT BRACKET COVER LH


    1. Attach the 4 claws to install the rear seat front bracket cover LH.