REAR SEAT ASSEMBLY(for LH Side) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seatback frame, seat cushion frame and reclining adjuster may injure your hands.

PROCEDURE


  1. REMOVE REAR SEAT HEADREST ASSEMBLY

  2. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

  3. REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY LH

    Click here

  4. REMOVE CENTER ARMREST HINGE COVER RH


    1. Return the seatback to the upright position.

    2. A00YT0I

      Detach the clamp to remove the center armrest hinge cover RH.

  5. REMOVE REAR SEAT NO. 3 CUSHION HINGE COVER


    1. A00YTSR

      Detach the clamp.

    2. A00YT7F

      Using a screwdriver, detach the 4 claws and clamp to remove the rear seat No. 3 cushion hinge cover.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE REAR SEAT LOWER CUSHION HINGE COVER LH

    A00YWZ0

    1. Using a screwdriver, detach the 4 claws and clamp to remove the rear seat lower cushion hinge cover LH.

      Tech Tips

      Tape the screwdriver tip before use.

  7. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY


    1. A00YTQH

      Remove the bolt, washer and rear seat center armrest assembly.

  8. REMOVE REAR SEAT NO. 1 CENTER ARMREST PLATE


    1. A00YSZL

      Remove the rear seat No. 1 center armrest plate.

  9. REMOVE REAR SEATBACK NO. 1 BOARD CAP


    1. A00YUS6C01
      *1 Protective Tape

      Using a screwdriver, detach the 3 claws to remove the rear seatback No. 1 board cap.

      Tech Tips

      Tape the screwdriver tip before use.

  10. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH


    1. A00YSJS

      Remove the 3 screws and reclining adjuster release handle LH.

  11. REMOVE REAR NO. 1 SEAT CUSHION ASSEMBLY LH


    1. A00YRVA

      Remove the 2 bolts and 2 bushes and lift up the cushion as shown in the illustration.

    2. A00YW2DE01

      Detach the clamp of the cable end.

    3. Disconnect the cable in the order shown in the illustration.

    4. A00YXAW

      Remove the 3 clamps.

    5. A00YUODC01
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws to remove the rear seatback cover.

      Tech Tips

      Tape the screwdriver tip before use.

    6. A00YU75

      Remove the 2 bolts, 2 bushes and rear No. 1 seat cushion assembly LH.

  12. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER


    1. A00YVJH

      Detach the 20 hooks and remove the separate type seat cushion cover (with pad) from the rear seat spring assembly LH.

    2. A00YQYB

      Remove the 5 hog rings.

    3. A00YT2T

      Remove the 13 hog rings and separate type rear seat cushion cover from the rear seat cushion pad LH.

  13. REMOVE REAR SEAT CUSHION MOULDING LH


    1. A00YR6S

      Detach the claw and 3 hooks to remove the rear seat cushion moulding LH.

  14. REMOVE REAR SEAT COVER LH


    1. A00YTX7

      Remove the clip and screw.

    2. Using a screwdriver, detach the claw to remove the rear seat cover LH.

  15. REMOVE REAR SEATBACK COVER LH


    1. A00YQYA

      Remove the clip and screw.

    2. Using a screwdriver, detach the claw to remove the rear seatback cover LH.

  16. REMOVE REAR SEAT REAR CUSHION MOULDING LH

    A00YW8M

    1. w/ Seat Belt Warning System:

      Detach the 2 clamps.

    2. Detach the claw and clamp to remove the rear seat rear cushion moulding LH.

  17. REMOVE NO. 2 SEAT ADJUSTER CONTROL CABLE ASSEMBLY

    A00YT9CE01

    1. Detach the 4 clamps.

    2. Detach the 2 clamps of the cable end.

    3. Disconnect the 2 cables in the order shown in the illustration and remove the No. 2 seat adjuster control cable.

  18. REMOVE REAR SEAT INNER BELT ASSEMBLY LH


    1. A00YTCR

      Remove the bolt and rear seat inner belt assembly.

  19. REMOVE REAR NO. 1 SEATBACK ASSEMBLY LH


    1. A00YR2C

      Remove the 3 bolts and rear No. 1 seatback assembly LH from the rear seat reclining adjuster assembly LH.

  20. REMOVE REAR SEATBACK BOARD LH


    1. A00YRSH

      Remove the 6 hog rings and detach the 2 pieces of fastening tape.

    2. A00YT40

      Detach the 7 claws and clamp to remove the rear seatback board assembly LH.

  21. REMOVE SEPARATE TYPE REAR SEATBACK COVER


    1. A00YRPP

      Detach the 8 claws to remove the 4 rear seat headrest supports.

    2. A00YQUF

      Detach the 9 clamps.

    3. Remove the separate type rear seatback cover (with pad) from the rear seatback frame sub-assembly LH.

    4. A00YX7Q

      Remove the 5 hog rings.

    5. A00YSUN

      Remove the 11 hog rings and separate type rear seatback cover from the separate type rear seatback pad.