REAR SEAT ASSEMBLY(for LH Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seatback frame, seat cushion frame and reclining adjuster may injure your hands.

PROCEDURE


  1. REMOVE REAR SEAT NO. 3 LEG SIDE COVER

    A01QPVM

    1. Using a screwdriver, detach the 4 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Detach the 2 guides and remove the rear seat No. 3 leg side cover in the direction shown by the arrow in the illustration.

  2. REMOVE REAR SEAT FRONT BRACKET COVER LH


    1. A01QP6N

      Using a screwdriver, detach the 4 claws to remove the rear seat front bracket cover LH.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE REAR SEAT ASSEMBLY LH


    1. A01QSRJ

      Remove the 2 bolts on the front side of the seat.

    2. A01QTND

      w/ Seat Heater System:


      1. Disconnect the connector.

      2. Detach the wire harness clamp.

    3. A01QOH0

      w/ Seat Belt Warning System:

      Disconnect the connector.

    4. Remove the 3 bolts on the rear side of the seat.

    5. Fully tilt the seatback forward. Then remove the rear seat assembly LH.

      Note

      Be careful not to damage the vehicle body.

  4. REMOVE SEAT LEG BRACKET

    A01QOGU

    1. Detach the clamp and remove the 4 bolts.

    2. Detach the guide to remove the seat leg bracket.