CAN COMMUNICATION SYSTEM(for RHD) PARTS LOCATION
ILLUSTRATION
| *A | w/ Audio and Visual System (for Radio and Display Type) | *B | w/ Navigation System |
| *C | for 4WD/AWD | *D | w/ Stop and Start System |
| *1 | MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) | *2 | INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY |
| *3 | COMBINATION METER ASSEMBLY | *4 | POWER STEERING ECU ASSEMBLY |
| *5 | DLC3 | *6 | SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY (STEERING ANGLE SENSOR) |
| *7 | AIR CONDITIONING AMPLIFIER ASSEMBLY | *8 | RADIO AND DISPLAY RECEIVER ASSEMBLY |
| *9 | NAVIGATION RECEIVER ASSEMBLY | *10 | 4WD ECU ASSEMBLY |
| *11 | ENGINE STOP AND START ECU | *12 | AIRBAG SENSOR ASSEMBLY |
ILLUSTRATION
| *A | w/ Lane Departure Alert System | *B | w/ Entry and Start System |
| *C | w/ Power Back Door System | *D | w/ Blind Spot Monitor System |
| *E | for 2AD-FHV, 2AD-CCo and Automatic Transaxle | *F | for 3ZR-FAE |
| *G | for 1AD-FTV | *H | w/ Parking Assist Monitor System (for Camera built-in ECU) |
| *1 | ECM | *2 | BRAKE ACTUATOR ASSEMBLY (SKID CONTROL ECU) |
| *3 | LANE DEPARTURE WARNING CAMERA | *4 | CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) |
| *5 | MULTIPLEX NETWORK DOOR ECU | *6 | BLIND SPOT MONITOR SENSOR LH |
| *7 | BLIND SPOT MONITOR SENSOR RH | *8 | TRANSMISSION CONTROL ECU ASSEMBLY |
| *9 | CONTINUOUSLY VARIABLE LIFT CONTROLLER ASSEMBLY | *10 | BATTERY CURRENT SENSOR ASSEMBLY |
| *11 | TELEVISION CAMERA ASSEMBLY | - | - |
| *a | Refer to Service Bulletin for installation position. | - | - |
ILLUSTRATION
| *A | for Power Seat | *B | w/ Power Back Door System |
| *1 | No. 1 CAN Junction Connector | *2 | No. 2 CAN Junction Connector |
| *3 | No. 3 CAN Junction Connector | *4 | No. 4 CAN Junction Connector |
| *5 | No. 5 CAN Junction Connector | *6 | No. 1 CAN Junction Terminal |