CHARGING SYSTEM Charge Warning Light Comes ON while Driving

PROCEDURE


  1. CHECK LOCK FUNCTION OF GENERATOR PULLEY WITH CLUTCH


    1. Check the lock function with the pulley installed in the vehicle.


      1. Visually check that the rotor in the generator operates with the engine running.

    2. A01QPAUC02
      A01QRKS Free
      A01QOU0 Lock

      Check the lock function with the pulley removed from the vehicle.


      1. Remove the generator pulley cap.

      2. Hold the generator rotor using SST, and turn the generator pulley with clutch clockwise to check that the outer ring locks.

        OK
        The outer ring locks.
      SST
      09820-63021
      Result
      OK
      NG

    NG

    REPLACE GENERATOR PULLEY WITH CLUTCH Click here

    OK

  2. CHECK INSTALLATION OF GENERATOR PULLEY WITH CLUTCH


    1. Start the engine and visually check the generator pulley with clutch for looseness.

      OK
      The generator pulley with clutch is not loose.
      Result
      OK
      NG

    OK

    REPLACE GENERATOR ASSEMBLY Click here

    NG

    TIGHTEN GENERATOR PULLEY WITH CLUTCH TO THE SPECIFIED TORQUE Click here