GENERATOR(for 150 A Type) INSTALLATION

PROCEDURE

1. INSTALL GENERATOR ASSEMBLY

   
   

   1. Install the generator assembly with the 2 bolts.

      Torque:

      52 N*m  { 530 kgf*cm, 38 ft.*lbf }

   2. Install the wire harness clamp bracket with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Connect the generator wire with the nut.

      Torque:

      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

   4. Install the terminal cap.

   5. Connect the generator connector.

2. INSTALL WIRE HARNESS CLAMP BRACKET

   
   

   1. Install the wire harness clamp bracket with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   2. Attach the wire harness clamp to the wire harness clamp bracket.

3. INSTALL FAN AND GENERATOR V BELT

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here